 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| STP5NK90Z STF5NK90Z N-CHANNEL 900V - 2 - 4.5A TO-220/TO-220FP Zener-Protected SuperMESHTMMOSFET Table 1: General Features TYPE STP5NK90Z STF5NK90Z s s s s s s s Figure 1: Package ID 4.5 A 4.5 A (*) Pw 125 W 30 W VDSS 900 V 900 V RDS(on) < 2.5 < 2.5 TYPICAL RDS(on) = 2 EXTREMELY HIGH dv/dt CAPABILITY IMPROVED ESD CAPABILITY 100% AVALANCHE RATED GATE CHARGE MINIMIZED VERY LOW INTRINSIC CAPACITANCES VERY GOOD MANUFACTURING REPEATIBILITY 3 1 2 TO-220 TO-220FP DESCRIPTION The SuperMESHTM series is obtained through an extreme optimization of ST's well established stripbased PowerMESHTM layout. In addition to pushing on-resistance significantly down, special care is taken to ensure a very good dv/dt capability for the most demanding applications. Such series complements ST full range of high voltage MOSFETs including revolutionary MDmeshTM products. Figure 2: Internal Schematic Diagram APPLICATIONS s HIGH CURRENT, HIGH SPEED SWITCHING s IDEAL FOR OFF-LINE POWER SUPPLIES, ADAPTORS AND PFC Table 2: Order Codes SALES TYPE STP5NK90Z STF5NK90Z MARKING P5NK90Z F5NK90Z PACKAGE TO-220 TO-220FP PACKAGING TUBE TUBE Rev. 3 September 2005 1/12 STP5NK90Z - STF5NK90Z Table 3: Absolute Maximum ratings Symbol VDS VDGR VGS ID ID IDM ( ) PTOT VESD(G-S) dv/dt (1) VISO Tj Tstg Parameter STP5NK90Z Value STF5NK90Z Unit V V V 4.5 (*) 2.8 (*) 18 (*) 30 0.24 A A A W W/C V V/ns 2500 V C C Drain-source Voltage (VGS = 0) Drain-gate Voltage (RGS = 20 k) Gate- source Voltage Drain Current (continuous) at TC = 25C Drain Current (continuous) at TC = 100C Drain Current (pulsed) Total Dissipation at TC = 25C Derating Factor Gate source ESD(HBM-C=100pF, R=1.5K) Peak Diode Recovery voltage slope Insulation Withstand Voltage (DC) Operating Junction Temperature Storage Temperature 4.5 2.8 18 125 1 900 900 30 4000 4.5 -55 to 150 -55 to 150 ( ) Pulse width limited by safe operating area (1) ISD 4.5A, di/dt 200A/s, VDD V(BR)DSS, T j T JMAX. (*) Limited only by maximum temperature allowed Table 4: Thermal Data TO-220 Rthj-case Rthj-amb Tl Thermal Resistance Junction-case Max Thermal Resistance Junction-ambient Max Maximum Lead Temperature For Soldering Purpose 1 62.5 300 TO-220FP 4.2 C/W C/W C Table 5: Avalanche Characteristics Symbol IAR EAS Parameter Avalanche Current, Repetitive or Not-Repetitive (pulse width limited by Tj max) Single Pulse Avalanche Energy (starting Tj = 25 C, ID = IAR, VDD = 50 V) Max Value 4.5 230 Unit A mJ Table 6: Gate-Source Zener Diode Symbol BVGSO Parameter Gate-Source Breakdown Voltage Test Conditions Igs= 1mA (Open Drain) Min. 30 Typ. Max. Unit V PROTECTION FEATURES OF GATE-TO-SOURCE ZENER DIODES The built-in back-to-back Zener diodes have specifically been designed to enhance not only the device's ESD capability, but also to make them safely absorb possible voltage transients that may occasionally be applied from gate to source. In this respect the Zener voltage is appropriate to achieve an efficient and cost-effective intervention to protect the device's integrity. These integrated Zener diodes thus avoid the usage of external components. 2/12 STP5NK90Z - STF5NK90Z ELECTRICAL CHARACTERISTICS (TCASE =25C UNLESS OTHERWISE SPECIFIED) Table 7: On /Off Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on Parameter Drain-source Breakdown Voltage Zero Gate Voltage Drain Current (VGS = 0) Gate-body Leakage Current (VDS = 0) Gate Threshold Voltage Static Drain-source On Resistance Test Conditions ID = 1 mA, VGS = 0 VDS = Max Rating VDS = Max Rating, TC = 125C VGS = 20 V VDS = VGS, ID = 100 A VGS = 10 V, ID = 2.25 A 3 3.75 2 Min. 900 1 50 10 4.5 2.5 Typ. Max. Unit V A A A V Table 8: Dynamic Symbol gfs (1) Ciss Coss Crss COSS eq (3). td(on) tr td(off) tf Qg Qgs Qgd Parameter Input Capacitance Output Capacitance Reverse Transfer Capacitance Equivalent Output Capacitance Turn-on Delay Time Rise Time Turn-off-Delay Time Fall Time Total Gate Charge Gate-Source Charge Gate-Drain Charge Test Conditions VDS = 25 V, f = 1 MHz, VGS = 0 Min. Typ. 4.8 1160 105 21.5 65.5 27 7.2 52 19 41.5 6.9 21.9 58 Max. Unit S pF pF pF pF ns ns ns ns nC nC nC Forward Transconductance VDS = 15 V , ID = 2.25 A VGS = 0 V, VDS = 0 to 720 V VDD = 450 V, ID = 2.2 A, RG = 4.7 , VGS = 10 V (see Figure 19) VDD = 720 V, ID = 4.4 A, VGS = 10 V (see Figure 22) Table 9: Source Drain Diode Symbol ISD ISDM (2) VSD (1) trr Qrr IRRM trr Qrr IRRM Parameter Source-drain Current Source-drain Current (pulsed) Forward On Voltage Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Reverse Recovery Current ISD = 4.5 A, VGS = 0 ISD = 4.5 A, di/dt = 100 A/s VDD = 35V (see Figure 20) ISD = 4.5 A, di/dt = 100 A/s VDD = 35V, Tj = 150C (see Figure 20) 518 3.2 12.2 712 4.66 13.1 Test Conditions Min. Typ. Max. 4.5 18 1.6 Unit A A V ns C A ns C A (1) Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. (2) Pulse width limited by safe operating area. (3) Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS. 3/12 STP5NK90Z - STF5NK90Z Figure 3: Safe Operating Area For TO-220 Figure 6: Thermal Impedance For TO-220 Figure 4: Safe Operating Area For TO-220FP Figure 7: Thermal Impedance For TO-220FP Figure 5: Output Characteristics Figure 8: Transfer Characteristics 4/12 STP5NK90Z - STF5NK90Z Figure 9: Transconductance Figure 12: Static Drain-source On Resistance Figure 10: Gate Charge vs Gate-source Voltage Figure 13: Capacitance Variations Figure 11: Normalized Gate Threshold Voltage vs Temperature Figure 14: Normalized On Resistance vs Temperature 5/12 STP5NK90Z - STF5NK90Z Figure 15: Source-Drain Forward Characteristics Figure 17: Avalanche Energy vs Starting Tj Figure 16: Normalized Breakdown Voltage vs Temperature 6/12 STP5NK90Z - STF5NK90Z Figure 18: Unclamped Inductive Load Test Circuit Figure 21: Unclamped Inductive Wafeform Figure 19: Switching Times Test Circuit For Resistive Load Figure 22: Gate Charge Test Circuit Figure 20: Test Circuit For Inductive Load Switching and Diode Recovery Times 7/12 STP5NK90Z - STF5NK90Z In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 8/12 STP5NK90Z - STF5NK90Z TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 D F G1 H F2 L2 L5 E 123 L4 G 9/12 STP5NK90Z - STF5NK90Z TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 10/12 STP5NK90Z - STF5NK90Z Table 10: Revision History Date 24-Sep-2004 05-Oct-2004 06-Sep-2005 Revision 1 2 3 Description of Changes First release. Complete datasheet Inserted Ecopack indication 11/12 STP5NK90Z - STF5NK90Z Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics All other names are the property of their respective owners (c) 2005 STMicroelectronics - All Rights Reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America 12/12 |
Price & Availability of STP5NK90Z
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |